CISCO 2960 Series

  • Cisco 2960X Series 48 port LAN Base switch Switch WS-C2960X-48TD-L
  • Cisco 2960X Series 48 port LAN Base switch Switch WS-C2960X-48TD-L
Cisco 2960X Series 48 port LAN Base switch Switch WS-C2960X-48TD-LCisco 2960X Series 48 port LAN Base switch Switch WS-C2960X-48TD-L

Cisco 2960X Series 48 port LAN Base switch Switch WS-C2960X-48TD-L

  • 48 Port
  • 2 Dual Purpose Uplink Ports
  • LAN  Base Image
  • 10/100/1000
  • Product description: Cisco 2960-X Series 24 port LAN Base switch with two 10 Gig SFP+ ports with LAN Base software
  • INQUIRY
CISCO 2960-X Series, LAN Base Switch WS-C2960X-48TD-L
Cisco 2960-X Series 24 port LAN Base switch with two 10 Gig SFP+ ports with LAN Base software.

Description
Cisco has always done an amazing job with catering to small and medium business. The Cisco 2960-X 
series is another generation to the already popular 2960 series that will enable the typical small to 
medium business to function at an enterprise level without the enterprise budget. The 2960-X series 
switches offer a fixed configuration of Ethernet switches that are not only Gigabit, but also stackable. 
The 2960-X was specifically designed for easy deployment and operational efficiency. These switches are 
also energy cautious and have a large range of IOS software features.

Within the 2960-X family, the switches come in either 24 or 48 variations and have gigabit Small Form 
Factor (SFP) or 10G SFP+ uplinks. Each switch is equipped with FlexStack Plus. This enables the switch 
to be stacked up to eight switches and can produce 80 Gbps of stack throughput. Along with stacking, 
each unit will feature USB and Ethernet managed interfaces, LAN Base or LAN Lite, and energy management 
features. Power over Ethernet Plus (PoE+) is available on most models.

Switching capacity on the 2960-X series come in twenty-two percent higher than the 2960-S units as 
they have a total capacity of 216 Gbps. Each switch will offer either two 10 gig uplinks or four 1 gig 
uplinks and zero-touch configuration as well as IOS software updates when you are deploying the 
2960-X switch.

Quick Specs:
48 Port
10/100/1000
2 Dual Purpose Uplink Ports (10/100/1000 or SFP+)
Fanless Design
EnergyWise Efficient
LAN  Base Image
1RU
108 Gbps Forwarding Bandwidth
216 Gbps Switching Bandwidth
128MB Flash
64MB DRAM (standard)
4096 VLANs 
130.9 Forwarding Rate

Standard Features:
Cisco AutoSecure
Dynamic Host Configuration Protocol (DHCP)
Stacking Master Configuration Management
Autonegotiation
Dynamic Trunking Protocol (DTP)
Port Aggeration Protocol (PAgP)
Link Aggeration Protocol (LACP)
Automatic Media-Department Interface Crossover (MDIX)
Switching Database Manager
Local Proxy Address Resolution Protocol (ARP)
Multicast VLAN Registration (MVR)
Unidirectional Link Detection Protocol (UDLD)
VLAN1 Minimization 
Smart Multicast, With Cisco FlexStack-Plus Technology
Internet Group Management Protocol (IGMP)
Voice VLAN
Cisco VLAN Trunking Protocol (VRP)
Layer 2 Trace Route
Trivial File Transfer Protocol (TFTP)
Network Timing PRotocol (NTP)
Mac-based VLAN Enabling 
Cisco TRUSTSec
Comprehensive 802.1X
IPv6 First-Hop Secuirty
Device Sensor and Device Classifier
Private VLANs
Access Control Lists (ACL's)
Secure Shell (SSH) Protocol 
MAC Address Notification
Bridge Protocol Data Unit (BPDU)
IGMP Filtering
Cross-Stack EtherChannel
Flexlink
IEEE 801.1s/w Rapid Spanning Tree Protocol (RSTP)
Power Redundancy
Cisco Hot Standby Router Protocol (HSRP)
Coss-stack QoS
Rating Limiting 
801.1p Class of Service
Also Included:
CiscoWorks LAN Management Solution
Cisco TrustSec
Cisco Network Assistant
Cisco Catalyst Smart Operations
Borderless Networks
    
Details
Series: Catalyst 2960-X
Stacking: FlexStack
Rack Units: 1RU
PoE Compatibility No PoE

CONTACT US

Contact: Michelle

Phone: +86 13670113421

Tel: 755 6113 1425

Email: michelle@poeethernetswitch.com

Add: 6F Huatian Business Centre, Baoan District, Shenzhen China.