CISCO 2960 Series

  • Cisco Catalyst 2960X Series 48 Port 370W PoE+ Switch WS-C2960X-48LPD-L
Cisco Catalyst 2960X Series 48 Port 370W PoE+ Switch WS-C2960X-48LPD-L

Cisco Catalyst 2960X Series 48 Port 370W PoE+ Switch WS-C2960X-48LPD-L

  • 48 Port
  • 2 SFP+
  • 370W
  • PoE+
  • Product description: CISCO 2960-X Series | 48 Port | PoE+ | 2 SFP+ | LAN Base | Stackable | 370W | 10G
  • INQUIRY
Cisco Catalyst 2960-X Series 48 Port 370W PoE+ Switch
Cisco 2960-X Series 48 port PoE+ switch with two 10 Gig SFP+ ports, 370 watts of available PoE power and LAN Base software.

Description
CISCO 2960-X Series | 48 Port | PoE+ | 2 SFP+ | LAN Base | Stackable | 370W | 10G | WS-C2960X-48LPD-L

Cisco has always done an amazing job with catering to small and medium business. The Cisco 2960-X series is another generation to the already popular 2960 series that will enable the typical small to medium business to function at an enterprise level without the enterprise budget. The 2960-X series switches offer a fixed configuration of Ethernet switches that are not only Gigabit, but also stackable. The 2960-X was specifically designed for easy deployment and operational efficiency. These switches are also energy cautious and have a large range of IOS software features.
Within the 2960-X family, the switches come in either 24 or 48 variations and have gigabit Small Form Factor (SFP) or 10G SFP+ uplinks. Each switch is equipped with FlexStack Plus. This enables the switch to be stacked up to eight switches and can produce 80 Gbps of stack throughput. Along with stacking, each unit will feature USB and Ethernet managed interfaces, LAN Base or LAN Lite, and energy management features. Power over Ethernet Plus (PoE+) is available on most models.
Switching capacity on the 2960-X series come in twenty-two percent higher than the 2960-S units as they have a total capacity of 216 Gbps. Each switch will offer either two 10 gig uplinks or four 1 gig uplinks and zero-touch configuration as well as IOS software updates when you are deploying the 2960-X switch.


Quick Specs:
48 Port
10/100/1000
PoE+
2 Dual Purpose Uplink Ports (10/100/1000 or SFP+)
Up to 370W total PoE capacity
EnergyWise Efficient
LAN Base Image
1RU
108 Gbps Forwarding Bandwidth
216 Gbps Switching Bandwidth
128MB Flash
64MB DRAM (standard)
4096 VLANs 
130.9 Forwarding Rate
277,960 hrs MTBF (Mean Time Before Fail)
Standard Features:
Cisco AutoSecure
Dynamic Host Configuration Protocol (DHCP)
Stacking Master Configuration Management
Autonegotiation
Dynamic Trunking Protocol (DTP)
Port Aggeration Protocol (PAgP)
Link Aggeration Protocol (LACP)
Automatic Media-Department Interface Crossover (MDIX)
Switching Database Manager
Local Proxy Address Resolution Protocol (ARP)
Multicast VLAN Registration (MVR)
Unidirectional Link Detection Protocol (UDLD)
VLAN1 Minimization 
Smart Multicast, With Cisco FlexStack-Plus Technology
Internet Group Management Protocol (IGMP)
Voice VLAN
Cisco VLAN Trunking Protocol (VRP)
Layer 2 Trace Route
Trivial File Transfer Protocol (TFTP)
Network Timing PRotocol (NTP)
Mac-based VLAN Enabling 
Cisco TRUSTSec
Comprehensive 802.1X
IPv6 First-Hop Secuirty
Device Sensor and Device Classifier
Private VLANs
Access Control Lists (ACL's)
Secure Shell (SSH) Protocol 
MAC Address Notification
Bridge Protocol Data Unit (BPDU)
IGMP Filtering
Cross-Stack EtherChannel
Flexlink
IEEE 801.1s/w Rapid Spanning Tree Protocol (RSTP)
Power Redundancy
Cisco Hot Standby Router Protocol (HSRP)
Coss-stack QoS
Rating Limiting 
801.1p Class of Service
 
Details
Rack Units: 1RU
PoE Compatibility: PoE+

CONTACT US

Contact: Michelle

Phone: +86 13670113421

Tel: 755 6113 1425

Email: michelle@poeethernetswitch.com

Add: 6F Huatian Business Centre, Baoan District, Shenzhen China.